Maintenance
24
Operating instructions
Replace the filter
To make sure that the filter is installed correctly,
a guide is installed on the filter seating.
Ø
Insert the filter into the device from the top.
The filter is inserted correctly when the bottom edge of
the filter is parallel to the top edge of the fan's housing
and the gap is approximately 5 mm wide.
Ø
Make sure that the filter is inserted correctly.
If the filter is not correctly fitted, proceed as follows:
Ø
Remove the filter.
Ø
Replace the filter again.
Only in hybrid operation:
Ø
Push the exhaust pipe onto the filter collar.
Ø
Seal the transition between the exhaust pipe and
the guide with the help of sealing tape.
Ø
Ensure that the exhaust pipe is correctly fitted.
Ø
Fit the screens or other attached modifications.
The filter filling has been exchanged.
Summary of Contents for BLB 60 FL
Page 63: ...Contact 63 ...
