Electric Insect Killer Use instructions
6
The insect killer is used to attract the flying insects by black light, such as flies, moths, mosquitoes,
and other flying pests, and then the electrically charged high voltage metal grids will electrocute the
insects. The insect killer series are thin modern styles, high efficiency and safety, with non-clogging
killing grids non-rusted, cracked or faded surface. The special designed black light tubes (ultra
violet rays) are completely harmless to human bodies and pets. Outer mesh protects human from
touching the high tension grids. No chemicals involved in it, without fumes, smell, spray, or mess
and pollution free. The insect killer series is ideal for indoor use, such as in the houses, factories,
food-shops, butcher’s storage, hospitals, etc.
WARNINGS:
Check the local voltage before working. Do not intend to touch the internal high voltage grids while
working which may cause the danger of electric shock. Never put any metal object inside the grids
while working.
The appliance is for indoor use only. It is not suitable for use in barns, stables and similar locations.
The appliance is not intended to be used in locations where flammable vapors or explosive dust is
likely to exist. Hang or mount the appliance at the place that children can’t reach(≥2.0M).
The appliance is not intended for use by the people (including children) with reduced physical,
sensory or mental capabilities, or lack of experience or knowledge, unless they have been strictly
supervised or instructed concerning the use of the appliance by a person responsible for their safe-
ty. Children should be supervised and make sure that they would not operate the appliance alone.
Never remove any fixed parts of the appliance to make any internal adjustment to avoid electric
shock. If the supply cord is damaged, it should be replaced by the manufacturer, its service agent or
similarly qualified person in order to avoid a hazard.
Unplug the appliance before cleaning it. Use a suitable brush to clean the high voltage metal grids
and get rid of the bodies of insects in the collection tray every week. Be sure it is powered off while
cleaning and maintaining the appliance.
Do not touch the high-voltage grids by fingers or metal.
Do not wash the appliance by water or place it in the rain.
Do not use it in the inflammable or explosive locales and alike.
Not suitable use in garages, stables and alike.
Repair should be carried out by the manufacturer or qualified electricians.
Make sure that your local voltage and frequency is suitable for the appliance. Ensure the earth-
connection works properly to prevent damage or danger.
The lamps in the appliance cannot be replaced occasionally. Ask the manufactory or its service
agent for help to change them with the approved lamps.
