ENGLISH
Cyclonic Vacuum Cleaner Use instructions
9
COMPONENTS
1. Handle
2. Hanging hole
3. Power cord winding hook
4. Locking handle button
5. On/Off switch
6. Electric motor
7. Dust container
8. Floor brushOT
9. Brush button
HOW TO OPERATER YOUR VACUUM CLEANER
1. Hold the vacuum cleaner firmly with your hand
on the handle. Open the dust cup to see whether
the filter is good.
2. Push the ON/OFF Power Switch to “ON” position.
3. Start vacuuming.
CAUTION: Make sure that you hold vacuum cleaner firmly. otherwise it can slip out of you hand and
cause injury.
CLEAN THE HEPA
Waring
: Always unplug from electrical outlet before opening the Dust Cup.
When the dust container is full of dust, please empty dust rinse the container in warm water and dry
completely before putting it back into the appliance.
WARNING:
Do not put the dust container and HEPA into the appliance when they are wet. Before
fixing, please make sure that they are all dry completely.
TECHNICAL SPECIFICATIONS
Power consumption: 600W
Power supply: 220-240V 50/60Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separa-
tely collected.
