Copyright © BEP Marine Limited, All rights reserved
Product version: DCM3.2
Page 4
Date: 12/05/05
1 Features
The 600-DCM3.2 Battery Monitor offers the following features:
§
1/10
th
of an Amp resolution in the range of +/- 0-50A
§
The Matrix Monitors use a dot Matrix LCD allowing for Full screen information on Function selected.
§
Voltage monitoring for up to 3 battery banks.
§
12 custom selectable legends eg: Start Battery, House Battery etc.
§
Hi/Low voltage alarm on all 3 banks.
§
Amps charge and discharge on house bank only.
§
Meter supplied with a 450-50mV shunt.
§
Capacity remaining in amp hours and percentage.
§
Software utilises Peukert’s exponent.
§
Suitable for use on battery banks 60-3000 Amp hours.
§
Low amp hour alarm.
§
New additional function for 2004
§
The bilge monitor function monitors bilge pump functions 24 hours, 7 days a week. Stores bilge pump
operations and accumulated time. Resetable when leaving the boat.
§
Function only available when third voltmeter position is not used.
The 600-DCM3.2 is designed to be surface mounted or recessed into a 2.5mm panel
