background image

Working principle: The microcomputer of the portable air compression massage system receives the 

information input by the user, the embedded software makes corresponding analysis 

operations according to the parameters selected by the user, starts each load through the 

drive circuit, and controls the air pump flow according to the parameters set by the user; 

then the pressure sensor collects The pressure signal is amplified, and the airbag pressure 

is controlled by the microcomputer after AD conversion.

Before use, please take out the product and wear it on the corresponding legs symmetrically, then 
turn  on  the  power  of  the  main  unit  and  adjust  the  appropriate  massage  gear  and  mode;  it  is 
recommended that the user maintain a comfortable and relaxed state, sit or lie down, and at the 
same  time  The  limbs  are  slightly  elevated  during  massage,  which  is  more  conducive  to  the 
lymphatic and blood circulation of the limbs.

1.  Push  the  ON/OFF  button  to  the  ON  position  to  turn  on  the  power  of  the  host  and  the  battery 
indicator light will be on;
2. Short press the gear/mode/standby button, the device enters the fatigue relief mode and starts to 
run in gear 1;
3. In the running state, every time you press the "Gear/Mode/Standby button", the gear will switch 
between 1-5 gears; when the equipment is running in 1-5 gears, long press the "Gear/Mode/Standby 
button" "1.5 seconds, when the gear returns to 0, the output stops and the output is in a standby 
state;
4. When the equipment is running in gears 1-5, quickly press the "gear/mode/standby button" twice 
within 1 second to switch the mode and change the mode indicator light;
5.  The  default  time  of  the  host  is  20  minutes,  when  the  host  runs  for  20  minutes,  it  will 
automatically stand by;
6. In any case, push the ON/OFF button to the OFF position to turn off the power of the host, and 
please turn off the power after use;

How it works

Preparation before Use

Operation Steps

10

9

How it works

Operation method

Pressure Sensor

Key operation

Indication display

Signal amplification

Microcomputer

Fault detection

Solenoid valve group

Microcontroller

Air pump speed control

During use, the user should remain in a relaxed state. If there is any discomfort during the 
treatment, they should stop using it immediately.

Note: The color of the indicator light corresponding to each mode
Blue: fatigue relief       Green: exercise recovery        Yellow: Deep Care

Summary of Contents for ACM-A1















Reviews: