SERIES G
4
5. Installation
5.1 General
WARNING!
The customer shall be responsible for the proper use of articles supplied by the company,
particularly the rotating shafts between their driving and driven members, and their guarding
for safety, and the company shall not be responsible for any injury or damage sustained as a
result of the improper use of the articles supplied.
Attention is hereby drawn to the danger of using naked lights in proximity to openings in
gearboxes and gear units supplied by the company, and the company shall not be liable for
any claim for injury or damage arising from any action in contravention of this warning.
:$51,1*
$OO6HULHV*XQLWVDUHGHVSDWFKHGZLWKRXWRLORQLQVWDOOLQJWKHXQLW¿OOZLWKUHFRPPHQGHG
lubricant to correct level. In accordance with the details in section 6
5.2 Prior To Installation
5.2.1. Check gear unit has not ben damaged.
5.2.2. Check the gear unit / motor nameplate matches the requirements of the machine the unit is to be
installed into.
5.2.3. Thoroughly clean the gearbox mounting surfaces that are to be used and the shafts of paint & anti-
corrosion agents using a commercially available solvent. Ensure solvent does not make contact with
the oil seals.
5.3. Fitting Of Components To Either The Unit Input Or Output Shaft
7KHLQSXWRURXWSXWVKDIWH[WHQVLRQGLDPHWHUWROHUDQFHLVWR,62WROHUDQFHNIRUVKDIWGLDPHWHU
PPDQGPIRUVKDIWGLDPHWHU!PPDQGWKH¿WWHGFRPSRQHQWVVKRXOGEHWR,62WROHUDQFH0
IRUERUHGLDPHWHUPPDQG.IRUERUHGLDPHWHU!PP
5.3.1. Ensure shaft extensions, bores & keys etc are cleaned.
,WHPVVXFKDVJHDUVVSURFNHWVFRXSOLQJVHWFVKRXOGQRWEHKDPPHUHGRQWRWKHVHVKDIWVVLQFHWKLV
would damage the shaft support bearings.
7KHLWHPVKRXOGEHSXVKHGRQWRWKHVKDIWXVLQJDVFUHZMDFNGHYLFH¿WWHGLQWRWKHWKUHDGHGKROH
provided in the end of the shaft. See Table 1 below.
,WHPVEHLQJ¿WWHGPD\EHKHDWHGWR&WRDLGDVVHPEO\IXUWKHU
CAUTION
STOP
INFORMATION