40
11 SERVICE AND REPAIRS
Before servicing and repairs make sure that you also read and understood the section ”Safety information” on
page 17 onwards.
DANGER: CRUSHING RISK!
Never start the machine when people are inside the risk area, inside the mechanic
protection of the machine, or up on the machine. The mechanical protection of the machine
must always be intact.
11.1 SERVICE CYCLES FOR SUB SUPPLIERS
To follow the instructions for service and preventive maintenance is strictly decisive for the product stability
and long life of the system. Thus, go through the technical documentation in order to check the specific
maintenance demands for each component.
NOTE: FUTHER INFORMATION!
Further information, see manuals from our sub-suppliers.
11.2 ADDRESSES OF SERVICE AGENTS
For addresses and service agents contact AB Benzlers or go to www.benzlers.com.
11.3 REPACKAGING
In case of claims on spare parts etc., pack together and mark with the order- or project number.
11.4 LIST OF SPARE PARTS AND CONSUMABLES
11.4.1 Drawings and spare part lists
For drawings and spare part lists contact AB Benzlers or go to www.benzlers.com.
11.4.2 Consumables
For recommended lubrications see ”Lubrication – temperature limitations” on page 31.
NOTE: ABOUT CONSUMABLES!
All consumables should be followed by a safety data sheet indicating the potential risks
of these products. No other products are allowed to be used than those verified by AB
Benzlers.