– 4 –
DV-9812
NOTES ON INSTALLATION
Precautions
Note: If there is already a disc in the disc slot, do not try to insert a second disc. This may
damage the device.
Always hold discs by the edge. In order to keep the disc clean do not touch the surface. Pull out the disc
as follows.
Note: A disc may become somewhat scratched (although not enough to make it unusable)
depending on the conditions under the environment & the way it has been handled.
These scratches are not an indication of any problem with the product.
Choose the mounting location where the unit will not interfere with the normal driving function of
The driver;
Before finally install the unit , connect the wiring and make sure it is all connected up properly, and
The unit & the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of unauthorized
Parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drill of holes or other modifications of
The vehicle.
Install the unit where it does not get in the driver’s way and cannot injure the passenger if there
Is a sudden stop, like an emergency stop or excessive brakes is applied.
If installed angle exceeds 30 degrees from horizontal, the unit might not giver its optimum
Performance.
Avoid installing the unit where it would be subject to high temperature such as direct sunlight, hot
Air, heater or where it would be subject to dust, dirt or excessive vibration.
