ENGLISH
10
2) ENGINE OIL REPLACEMENT
1. Place the machine on a level surface and warm up the
engine for several minutes. Then stop the engine and
turn the fuel cock knob to “OFF””. Turn the fuel tank cap
air vent knob clockwise.
2. Loosen the screw and remove the cover.
3. Remove the oil filler cap
4. Place an oil pan under the engine. Tilt the generator to
drain the oil completely
5. Replace the generator on a level surface.
6. Add engine oil to the upper level.
7. Install the oil filler cap
Exhaust
System
Carburetor
Cooling
system
Starting
system
Idle speed
Fittings /
Fasteners
Crankcase
breather
Generator
Check for leakage. Retighten
or replace gasket if necessary
Check muffler screen.
Clean / replace if necessary.
Check choke operation
Check fan damage.
Check recoil starter operation.
Check and adjust engine idle
speed
Check all fittings and faste-
ners correct if necessary.
Check breather hose for
cracks or damage. Replace if
necessary
Check the pilot light comes on
