SCOUT200 Series Quick Start Guide 6
Off-Route Recording
1.
Select
MEASURE
from the app’s main menu.
The
Measure
window displays these options:
Spectrum / Waveform
Take an off-route spectrum or waveform recording or both.
Demodulation
Take an off-route demodulation recording.
6 Pack
Simultaneously record three waveforms
and three spectrums per channel.
Tach
Measure a machine’s running speed using a tachometer.
Keypad
Enter additional information such as temperature,
pressure, or motor current of a machine.
Tach Diagnostics
Troubleshoot tachometer input signals or triggering problems.
Adjust threshold and hysteresis settings.
Cable Test
Check sensor bias voltages and cable connections.
2.
Select a measurement type such as
6Pack
.
The
Measure Configuration
window is displayed.
3.
You can change the default parameter set and the default sensor.
In the S1 Collector app, a
thin blue line
next to an option
represents a
drill-down menu
. The drill-down menu bar
displays related operations.
To change sensor settings, use the blue
Drill-Down Menu Bar
next to the parameter set and the sensor.
4.
To begin an off-route recording, select
MEASURE
.
During the recording, up to four measurement charts
are displayed. Choose from these operations:
DATA TYPES
Select which measurements to view.
PAUSE
Halt display of new measurement data.
SAVE
Save the recording. Then select or
create a location for an enterprise, machine, point
and axis.
Copyright 2021 Baker Hughes Company. All rights reserved
Bently Nevada, SCOUT100, Keyphasor, and vbSeries are registered trademarks of Bently Nevada, a Baker
Hughes Business, in the United States and other countries. The Baker Hughes logo is a trademark of Baker
Hughes Company. All other product and company names are trademarks of their respective holders. Use of
the trademarks does not imply any affiliation with or endorsement by the respective holders.
