SCOUT200 Series Quick Start Guide 3
Connectors
DC Connector
Insert the supplied 12V adapter into the DC connector to charge the data collector.
Charge the device in a safe area only.
CH1 & CH2+ LEMO Connectors
are silver with double alignment keys.
Connect sensors to these inputs.
Use the CH2+ connector with the triple adapter or a triax for four channel models.
TACH Connector
is black with single alignment key.
Connect a tachometer or Keyphasor to Tach Connector.
S1 Collector App Fundamentals
Download and Install S1 Collector App Open S1 Collector App
1.
Go to
GE BN Technical Support Portal
at
2.
Under
Products & Documentation
, select
Download
Center
.
3.
Select
Browse Software Updates
.
4.
Select
Service Packs, Firmware, Misc. Software
.
5.
Browse the list of available software to find the app.
6.
Select
S1 Collector App
.
7.
Follow the instructions to download and install the app.
1.
Turn on your industrial handheld.
2.
Select
Applications
.
3.
Find and select
S1 Collector
.
Pair S1 Collector App with SCOUT200 Series
8.
Enable Bluetooth on your industrial handheld.
Refer to the device’s user manual for instructions.
9.
Open the
S1 Collector App.
10.
Select
Devices
.
11.
Wait while the handheld scans to find nearby data
collectors. A list of available devices is displayed.
12.
Select your data collector using its serial number.
A message is displayed while the app connects to the
data collector.
When you connect to a data collector, your
industrial handheld device displays a
Bluetooth Pairing Request
message. Select
Pair
to proceed.
