23
© 2012 Benthin
®
| Misprints, errors and changes reserved | 31-05-2012
Manual Pleated Fabric Cutter MPC 100
8
Service / Maintenance
8.1 Safety
8.2
Service plan
What?
When?
Who?
Works to be carried out
Device
daily and
user
with vacuum cleaner
when required
clean with
compressed air
If necessary, go over again
with vacuum cleaner.
Guide posts weekly
expert
clean
Wipe clean with a cloth
and oil lightly.
Recommended lubricants
Location
Material
Guide posts
VDL-30 compressor oil from Turbotank
Note!
Only use accessories and spare parts made by Benthin.
Attention!
When changing the trapezoid blade, secure the cutting lever against
accidental operation.
CAUTION!
Risk of injury due to improper
maintenance work!
Improper maintenance can lead to severe personal and
property injuries.
Therefore:
• Maintenance work may only be carried out by qualified staff who have
also been authorised and instructed by the operator.
• Prior to commencement of work, make sure that the conditions to start
the mounting are fulfilled.
• Pay attention to order and cleanliness on the assembly site. Parts or
tools lying loosely on top of each other or which are lying around are
accident sources.
• If parts have been replaced:
- Pay attention to proper fitting of spare parts.
- Every fixing element must be properly reinstalled.
