39
PROGRAMMING
PROGRAMMING
The GTCOM can be programmed via the
GTCOM
Application from
Bentel
Security Suite
Software Package..
It is possible to use the custom-made
CVSER9F9F
Serial Cable (accessory
item) for the PC to GTCOM link, or make a serial cable, as per the following
diagram.
One end of the cable must be inserted into connector 5 on the GTCOM, and the
other into a PC serial port (refer to the Computer manual for details regarding
the serial connectors).
The ADSER/9M25F adapter (accessory item) can be used for computers with
25 pin connectors.
Work carefully through the following steps to program the GTCOM via PC:
1
Istall the
Bentel Security Suite
, as per the software package instructions.
2
Start the
GTCOM
application.
3
Program the parameters, as per the instructions in the following paragraphs.
DB9 female
connector
DB9 female
connector
2
2
3
3
4
4
5
5
6
6
7
7
8
8
