Installation and Operating Instructions - 1000V BUSS, Grounded (125A to 400A)
950-003342-000 Rev B
38
Chapter 3: Installation Procedure
5. Terminate all ungrounded outputs on the ungrounded busbar. Terminate all
grounded inputs and outputs on the grounded busbar.
Figure 18
Connecting to the grounded busbar
6. Terminate all equipment ground conductors to the equipment ground
terminal block. Torque to specifications; see the torque label on the inside of
the front door.
Attaching Conductors to the Inverter
After referring to the electrical drawings to determine which wire to use, connect
ungrounded and grounded output conductors to appropriate points in the
inverter, depending on the system.
Refer to the inverter instructions.