24
4.7 Channel Menu : Setting up the parameters of input channels
Channel Setup Menu allows the user to select various parameters related to
each channel. Channel On/Off selection, Input range, Coupling type, Window
type, Force factor, Exponential factor Channel ID, Auto Advance, Advance
number
Select channel setup to define each channel according to what you are
measuring. You can turn each channel on/off, select the input range, coupling,
window, and other parameters for making a good measurement.
ON/ OFF :
Turns on/off each channel
Input Range :
Select from 5V or 20V input range. This should match the
output of the device that you are connecting to.
Coupling :
Select AC, DC, IEPE, or 0V Mic.
Window :
Select Rectangle, Hanning, Flattop, Force, Exponential.
Force Factor :
Enter the desired force input box and then press [
OK
]. The
width of the force window in this case is 0.1 or 10%.
Exponential Factor :
With the [
Navigation Keypad
] enter the desired value
and then press [
OK
]. The attenuation rate of the exponential window in this
example is equal to 0.1 or 10% at the end of the time block.
