BENSON LD7 1LP, Parts List And Service Manual, Page: 15 / 23

PAGE No 8
1:7 PLACE THE HEATER IN ITS NORMAL
POSITION AND REMOVE THE REMAINING 2
ALLEN SCREW (FIG. 8)
1:8 UNPLUG THE MULTI WAY CONNECTOR AND
THE 4 THERMOSTAT LEADS (2 ORANGE 2
YELLOW)
1:9 UNPLUG THE PHOTOCELL (FIG. 9)
1:10 CAREFULLY REMOVE THE FAN AND COVER
(FIG. 10) ASSEMBLY FROM THE CASING, AND
THEN REMOVE THE FAN FROM THE REAR
SLOTTED COVER BY REMOVING THE 4
ALLEN SCREWS.
1:11 REPLACE WITH A NEW UNIT.
1:12 RE ASSEMBLE BY REVERSING THE STRIP
DOWN PROCEDURE
(NOTE WHEN REPLACING THE PHOTOCELL
UNIT- IT ONLY FITS ONE WAY, DO NOT USE
EXCESSIVE FORCE WHEN REPLACING - IT
COULD BE DAMAGED)
SERVICE MANUAL
FIG. 8
FIG. 9
FIG. 10
1:6 TIP THE HEATER ON ITS SIDE TO EXPOSE
THE 2 LOWER FAN RETAINING SCREWS, AND
REMOVE THE TWO SCREWS (FIG. 7)
FIG. 7