PAGE No 13
FIG. 23
SERVICE MANUAL
10
TO REPLACE THE SOLENOID VALVE
FOLLOW STEPS FOR REMOVING THE
INJECTOR, BUT DO NOT REMOVE THE
INJECTOR.
10:1 UNPLUG THE 3 WAY SOCKET FROM THE
SOLENOID (FIG. 22, 23)
10:2 REMOVE THE FUEL INLET CONNECTOR UNIT
10:3 REMOVE THE SOLENOID RETAINING CIRCLIP
10:4 SLIDE THE SOLENOID OFF THE FUEL INLET
10:5 UNFASTEN THE BURNER NOZZLE FUEL INLET
FROM THE SOLENOID VALVE USING A 10MM
AF OPEN ENDED SPANNER
10:6 REMOVE THE SOLENOID VALVE USING A
12MM AF OPEN ENDED SPANNER
10:5 REPLACE THE DEFECTIVE UNIT AND REFIT
ALL COMPONENTS, REVERSING THE STRIP
DOWN PROCEDURE
NOTE ON THE UNDERSIDE OF THE VALVE
THERE IS AN ARROW - THE VALVE MUST BE
FITTED WITH THIS POINTING TO THE
NOZZLE INJECTOR FUEL PIPE
FIG. 22
3 WAY
SOCKET
SOLENOID
CIRCLIP
VALVE
