bensat BEN350IR, User Manual, Page: 51 / 96

Antenna Positioning (USALS)
This mode will allow you to use a DiSEqC motor
controlled by USALS (Universal Satellite Automatic
Location System). To move the antenna, press OK
button to select the Satellite Position, My Longitude
and My Latitude. Select "Go To 0" and press "OK" in
Command Mode for "Position 0" which, for the polar
positioner, is the imaginary the polar positioner, is the
imaginary point on the geo-stationary orbit
of the satellite, which has the same longitude as the place of installation.
Select “Go To Position" and press "OK" in Command Mode to send the "Reference"
command for the polar positioner which is utilized during re-calibration of the polar
motor function. If you wish to manually control the positioner, use "Step Size" and
"Move Dish" commands to move the antenna.
The factory set password is 0000.
From these menus you can edit channel lists. You
can rename a favorite channel list, and arrange the
order of the channels.
The TV list can contain hundreds of channels.
5-2 System Setting
5-2-1 Edit Channel
Move Channels
In this mode, you can arrange the order of
channels.(only in case that sort option is set to Normal)
1)Select the channel you want to move using
, buttons.
2) Press GREEN button to select the Move mode.
The right side of the highlighted channel will
change to indicate that Move mode has been
selected.
3) Press , buttons again to move the channel.
4) When the channel is in the desired position,
press OK button to confirm.
5. Main menu
17