![background image](http://html1.mh-extra.com/html/benq/x12000/x12000_user-manual_2735072032.webp)
32 Maintenance
Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically calculated by
the built-in timer. The method of calculating the equivalent lamp hour is as follows:
Lamp Usage Time = (hours used in
Normal
mode) + (hours used in
Economic
mode)
Total (equivalent) lamp hour = 1.0 x (hours used in
Normal
mode) + 1.0 x (hours used in
Economic
mode)
To obtain the lamp hour information:
1. Go to
SYSTEM SETUP: ADVANCED
>
Lamp Settings
and press
OK
. The
Lamp Settings
page appears.
2. Press
to select
Lamp Timer
and press
OK
. The
Lamp Timer
information is displayed.
You can also get the lamp hour information on the
INFORMATION
menu.
Extending lamp life
• Setting the
Light Mode
Go to
PICTURE
>
Advanced
>
Light Mode
and press / or press
LIGHT MODE
on the
remote control to selects a suitable lamp power from among the provided modes.
Setting the projector in
Economic
mode extends lamp life.
• Setting
Auto Off
This function allows the projector to turn off automatically if no input signal is detected after a set
period of time to prevent unnecessary waste of lamp life.
To set
Auto Off
, go to
SYSTEM SETUP: BASIC
>
Auto Off
and press / .
Lamp mode
Description
Normal
Provides full lamp brightness
Economic
Lowers brightness to extend the lamp life and decreases the fan noise
• The apparent brightness of the projected image will vary depending on the ambient lighting conditions, selected
input signal contrast/brightness settings, and is directly proportional to projection distance.
• The lamp brightness will decline over time and may vary within the lamp manufacturers specifications. This is
normal and expected behavior.