Menu Functions
38
•
Auto Source
Sets whether the projector searches automatically for input sources.
Select
On
to enable the projector to scan for input sources until it
acquires a signal. If the function is set to
Off
, the projector selects the
last used input source.
•
Menu Type
Switches to the
Advanced
OSD menu.
•
HDMI Format
Selects an input source type for the HDMI signal. You can also manually
select the source type. The different source types carry different
standards for the brightness level.
HDMI Format is only available when the HDMI signal is selected.
•
Reset Lamp
Timer
Activates this function only after a new lamp is installed. When you select
Reset
, a
"Reset Successfully"
message displays to notify that the lamp
time has been reset to "0".
•
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Language,
Projector Position, and Reset Lamp Timer.
•
Information
Displays the following information about your projector.
•
Source:
Displays the current signal source.
•
Picture Mode:
Displays the current Picture Mode.
•
Resolution:
Displays the native resolution of the input source.
•
Color System:
Displays input system format.
•
Equivalent Lamp Hour:
Displays the number of hours the lamp
has been used.
•
3D Format:
Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
•
Firmware Version:
Displays the firmware version of your
projector.
Some information is given only when certain input sources are in
use.
Menu
Submenus and Descriptions
