background image

  29

  Important safety instructions

Advanced picture quality controls

There are more advanced functions in the 

Picture

 > 

Advanced...

 and 

Display

 menus to be adjusted to 

your preference. To save the settings, just press 

MENU/EXIT

 to leave the OSD menu.

Setting Black Level

Highlight 

Black Level

 in the 

Picture

 > 

Advanced...

 menu and press  /  on the projector or 

remote control to select 

0 IRE

 or 

7.5 IRE

.

The grayscale video signal is measured in IRE units. In some areas which use NTSC TV standard, the 
grayscale is measured from 7.5 IRE (black) to 100 IRE (white); however, in other areas where PAL 
equipment or Japanese NTSC standards are used, the grayscale is measured from 0 IRE (black) to 100 IRE 
(white). We suggest that you check the input source to see if it is with 0 IRE or 7.5 IRE, then select 
accordingly.

Controlling image clarity

You may have static or noisy projected pictures.

To achieve better picture clarity:

1. Highlight 

Clarity Control

 in the 

Picture

 > 

Advanced...

 menu and press 

MODE/ENTER

 on the 

projector or remote control to display the 

Clarity Control

 page.

2. Press   to select 

Noise Reduction

 and press  /  to set the desired value.

• 

Noise Reduction

: Reduces electrical image noise caused by different media players. The higher 

the setting, the less the noise. 

Setting a preferred color temperature

To set a preferred color temperature:

1. Highlight 

Color Temperature Fine Tuning

 in the 

Picture

 > 

Advanced...

 menu and press 

MODE/ENTER

. The 

Color Temperature Fine Tuning

 page displays.

2. Press  /  to highlight the item you want to change and adjust the values by pressing  / .

• 

Red Gain

/

Green Gain

/

Blue Gain

: Adjusts the contrast levels of Red, Green, and Blue.

• 

Red Offset

/

Green Offset

/

Blue Offset

: Adjusts the brightness levels of Red, Green, and Blue.

3. To save and leave the settings, press 

MENU/EXIT

.

Selecting a Gamma setting

Highlight 

Gamma Selection

 in the 

Picture

 > 

Advanced...

 menu and select a preferred setting by 

pressing  /  on the projector or remote control.

Gamma refers to the relationship between input source and picture brightness.

• Gamma 

1.6/1.8/2.0/BenQ

Select these values according to your preference.

• Gamma 

2.2

Increases the average brightness of the picture. Best for a lit environment, meeting room or family 
room.

• Gamma 

2.4/2.5

Best for viewing movies in a darkened environment.

• Gamma 

2.6/2.8

Downloaded From projector-manual.com BenQ Manuals

Summary of Contents for W1250




























































Reviews: