Basic operations
16
Basic operations
Turning the product on or off
• Be sure to follow the instruction of
• To turn on the product, press the
Power
button on the back of the product or
on
the remote control.
• To turn off the product, press the
Power
button on the back of the product or
on
the remote control.
Initial setup
After you have connected the product to the power, you are ready to power on the
product. The first time you power it on, you will be guided through a series of setup
screens. Follow the on-screen instructions or the steps below to start up and complete
the initial setup.
1. Turn on the product. Wait for it to boot up with the BenQ screen. This may take a
moment.
2. Tap
Next
on the screen to begin. Follow the on-screen instructions to set up the
language, date and time, and network. Or your can skip some of these steps and
complete the setup later.
To adjust other settings, you can press
on the remote control to enter the OSD menu again.
Refer to
for more information on the OSD menus and their settings.
LOCK
LOCK
IR Receiver