![background image](http://html.mh-extra.com/html/benq/tk800m/tk800m_user-manual_2735020027.webp)
27
Menu operation
PICTURE menu
Picture Mode
The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
•
Bright
: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
•
Vivid TV
: Being slightly brighter than
Cinema
mode, it is suitable for playing
movies in rooms where there is a small amount of ambient light, e.g. your living
room.
•
Cinema
: With well-balanced color saturation and contrast with a low brightness
level, this is most suitable for enjoying movies in a totally dark environment (as you
would find in a commercial cinema).
•
Sport
: Best for watching indoor matches, e.g. basketball, volleyball, and
badminton.
•
Football
: Perfect for watching games on the field, e.g. football and soccer.
•
Silence
: Minimizes the acoustic noise. It is suitable for the need of watching
movies that requires an ultra-quiet environment so that you won't be disturbed by
the noise of the projector. This mode is only available when the
DISPLAY
>
Silence
menu is set at
On
.
•
User 1
/
User 2
: Recalls the settings customized based on the current available
picture modes. See
User Mode Management on page 27
.
•
3D
: Optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
•
HDR10
/
HLG
: Delivers High Dynamic Range effects with higher contrasts of
brightness and colors. This mode is only available when
DISPLAY
>
HDR
is set
at
Auto
, and HDR content is detected.
User Mode
Management
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the
User
1/User 2
) as a starting point and customize the settings.
•
Load Settings From
1. Go to
PICTURE
>
Picture Mode
.
2. Press
/
to select
User 1
or
User 2
.
3. Press
to highlight
User Mode Management
, and press
OK
. The
User
Mode Management
page is displayed.