background image

14

4.  OSD Menu

An overall view of the On-Screen Display (OSD) structure is 

shown below. You can use it as a reference for further adjusting 

your display.

4.1.  Navigating  the OSD Menu

4.1.1.  Navigating the OSD menu using the 

remote control

EXIT

MENU

SET

1.  Press [

MENU

] button on the remote control to display the 

OSD menu.

2.  Press [ ] or [ ] button to choose the item you want to 

adjust.

3.  Press [

SET

] button to enter the submenu.

4.  In the submenu, press [ ] or [ ] button to toggle among 

items, press [ ] or [ ] button to adjust settings. If there is a 
submenu, press [

SET

] button to enter the submenu.

5.  Press [

EXIT

] button to return to the previous menu, or press 

[

MENU

] button to exit the OSD menu.

4.1.2.  Navigating the OSD menu using the 

display’s control buttons

1.  Press [

MENU

] button to display the OSD menu.

2.  Press [ ] or [ ] button to choose the item you want to 

adjust.

3.  Press [

SOURCE

] button to enter the submenu.

4.  In the submenu, press [ ] or [ ] button to toggle among 

items, press [ ] or [ ] button to adjust settings. If there is a 

submenu, press [

SOURCE

] button to enter the submenu.

5.  Press [

MENU

] button to return to the previous menu, or 

press [

MENU

] button several times to exit the OSD menu.

4.2.  OSD Menu Overview

4.2.1.  PICTURE menu

PIP

1
2
3

SET

EXIT

MENU

:SEL

:NEXT

BRIGHTNESS

CONTRAST

SHARPNESS

BLACK LEVEL

TINT

COLOR

COLOR TEMPERATURE

USER COLOR

GAMMA SELECTION

NATIVE

NATIVE

NOISE REDUCTION 

FILM MODE

PICTURE RESET

PICTURE

:RETURN

:EXIT MENU

50

50

70

50

BRIGHTNESS

Adjust the overall image brightness by changing the intensity of 

the LCD panel’s backlight.

CONTRAST

Adjust to sharpen the picture quality. The black portions of 

the picture become richer in darkness and the white become 

brighter.

SHARPNESS

Adjust to improve the image detail.

BLACK LEVEL

Adjust to change the image brightness.

TINT

Use the [ ] or [ ] button to adjust. Press the [ ] button and 

the flesh tone color turns slightly green. Press the [

] button 

and the flesh tone color turns slightly purple.

NOTE:   This item is functional for 

HDMI

(Video mode), 

Video

and 

YPbPr

 inputs only.

COLOR

Adjust to increase or decrease the intensity of colors in the 

image.
NOTE:   This item is functional for 

HDMI

(Video mode), 

Video

and 

YPbPr

 inputs only.

COLOR TEMPERATURE

Select a color temperature for the image. A lower color 

temperature will have a reddish tint, whilst a higher color 

temperature gives off a more bluish tint.
The options are: {

3000K

} / {

4000K

} / {

5000K

} / {

6500K

} / {

7500K

/ {

9300K

} / {

10000K

} / {

NATIVE

} / {

USER

}.

USER COLOR

With this function you can adjust the color tones of the image 

precisely by changing the R (Red), G (Green) and B (Blue) 

settings independently.
NOTE:   This item is functional only when {

COLOR 

TEMPERATURE

} is set to {

USER

}.

Summary of Contents for SL461A






























Reviews: