background image

Setting up the display

6

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket or 

on a horizontal surface with the optional desktop stands. Please pay attention to the 

following notes during installation:
• This display should be installed by at least two adult persons. Attempting to install this 

display by only one person may result in danger and injuries.

• Refer the installation to qualified technicians. Improper installation may cause the 

display to fall or malfunction.

Installing the display on a wall

1. Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. 

Make sure that the size of the cloth is larger than the display.

2. Gently lay the display on the cloth with the LCD screen facing down.
3. Remove the desktop stands from the display if installed.

4. Identify the wall mounting screw 

holes on the back of the display 

as shown in the illustration.

5. Install the wall mounting bracket 

on the display and attach the 

display to the wall according to 

the mounting bracket’s 

instructions. The length of the 

screw should exceed the 

thickness of the wall mounting 

bracket by at least 10 mm. Make 

sure that all screws are 

tightened and secured properly. 

(Recommended torque: 470 - 

635N•cm). The mounting means 

should be strong enough to bear 

the weight of the display.

400mm

400mm

*Screw type: M8

Thickness of 
the wall 
mounting 
bracket

10 mm
(0.39")

LCD display

Summary of Contents for RP700+




















































Reviews: