![background image](http://html1.mh-extra.com/html/benq/rp6503/rp6503_user-manual_2733832023.webp)
Connections
18
Connecting the touch module
Connect the
TOUCH-USB
port on the display to the USB port of a computer using the
supplied USB cable. The touch module of the display supports easy Plug-and-Play opera-
tion. There is no need to install additional drivers on the computer.
• Connect
TYPE-C
port with the computer.
•
HDMI
must be used with
TOUCH-USB
at the front panel.
•
HDMI 1
must be used with
TOUCH-USB
and
DP.
•
HDMI 2
must be used with
TOUCH-USB
and
VGA.
TOUCH-USB
HDMI2
VGA
TYPE-C
TOUCH-USB
HDMI
TOUCH-USB
HDMI1
DP
• Avoid blocking the touch screen frame (where sensors are located) when initiating the touch
module.
• It is highly recommended that you connect the display to the PC or laptop directly. Avoid
connecting the display to a face plate device which may cause failures in touch operations.
• If any ghost image occurs, please try to un-plug and then re-plug all USB cables. If the failure image
still exists, use another USB Type-A to Type-A cable.