BenQ RE6501 User Manual Download Page 13

Page: 13 / 79

Parts of the display and their functions

Front/Rear panel

No.

Name

Description

Power Switch

Used to isolate the power supply from the system.
• When the switch is set to ON (

), the system will

automatically enter standby mode.

• When the switch is set to OFF (

), this will completely cut

off the power supply.

Power-in

Connects with the supplied power cord.

Ambient Light

Sensor

Detects the ambient room light conditions to automatically

adjust the display backlight brightness.

Remote Control

Sensor

Receives the signal from the remote control.

Power

Tap to enter energy saving mode. Press and hold for 4

seconds or more to power off.

Home

Press to back to main screen.

Return

Press to return to previous level of menu.

Menu

Press to enter function menu.

Volume Down

Press to decrease volume.

Volume Up

Press to increase volume.

Summary of Contents for RE6501
















































































Search results

Summary of Contents for RE6501

Reviews:

Related manuals for RE6501

Brands by name

Popular brands

BenQ RE6501, User Manual

Search results

Summary of Contents for RE6501

Reviews:

Related manuals for RE6501

Brands by name

Popular brands