46
3. Touch the setting you wish to adjust, and touch to select your preferred option
from the popup menu.
Except changing WLAN password, all of these camera settings can be found in your camera’s
Settings mode. To learn more about each setting, please refer to
“Use your 4G Connected
Cam” on page 23
.
Change the WLAN password
1. In the main screen of the app, touch
>
CAMERA > Change WLAN
password.
2. Enter the current WLAN password (default: 00000000), and touch
OK.
3. Enter the new password, and touch
OK.
4. Enter the same new password again for confirmation, and then touch
OK.
O
O
After changing the WLAN password, your mobile device will automatically be disconnected
from the camera. Turn on your mobile device’s WLAN setting, select “BenQ QC1 XXXXX”
and then touch “Forget”. Select “BenQ QC1 XXXXX” again from the WLAN list, touch
“Connect” and then enter your new WLAN password to re-pair your device with the
camera (please refer to
“Set up the app” on page 38
.)
O
O
If you forget your WLAN password, you can use the camera to reset the password to
default. For detailed instructions, please refer to
“Password” on page 53
.
Transfer camera files to a computer
1. With the battery installed in your camera, insert the smaller end of the USB cable
into your camera’s micro USB port.
2. Insert the larger end of the USB cable into your computer’s USB port.
3. On your computer, your camera is detected as a media device. Click on the device
or select an action from the data transfer window that appears. Copy or move your
camera files to the computer.
When a microSD card is inserted into your camera, the microSD card and your camera’s
internal storage are mounted as two drives on your computer. You can click on the drive
where you want to transfer files between your camera and the computer.
Do not interrupt USB connection during data access process. Stored data may be lost or
damaged.
