background image

 

 

2  Copyright 

Copyright 

Copyright 2004 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, 
transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any 
means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of 
this company. 
 

Disclaimer 

BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents 
hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ 
Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof 
without obligation of this company to notify any person of such revision or changes. 

 

Safety Instructions 

1. 

Follow the instructions in this guide when installing the projector with this bracket. Improper or inadequate 
installation could cause the projector to fall and cause injures. 

2. 

Make sure the installation is secure enough to bear the weight of all and withstand vibrations. 

3. 

Use only the parts provided with the bracket, and any parts (commercially available) that are specified in this guide. 

4. 

Do not modify the bracket or the parts provided with the bracket. 

5. 

Do not use damaged parts. If any parts become damaged, contact your dealer. 

6. 

All bolts and screws must be tightened securely. 

7. 

Make sure not to block any ventilation openings when installing the projector. 

8. 

Do not install the projector in a location that is subject to high levels of dust or humidity. 

9. 

Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to extreme 
fluctuations in temperature (such as near an air conditioner). 

10. 

Clean only with a dry cloth. 

11. 

Special techniques and experience are required when installing the projector with this bracket. It is recommended 
that you contact your dealer to install the projector for you. 

12. 

Once the projector is installed, safety checks should be conducted on a regular basis. 

 

Table of Contents 

Packing Parts List ............................................................................................................................................................................3

 

Projector Installation and Throw Distance Chart .........................................................................................................................4

 

Installing a Projector with The Ceiling Bracket.............................................................................................................................5

 

Adjusting the Ceiling Bracket .........................................................................................................................................................8

 

Specifications and Diagrams ........................................................................................................................................................10

 

 

 
 

Summary of Contents for PB9200 - XGA LCD Projector











Reviews: