Operation
38
Setting the presentation timer
The presentation timer can indicate the presentation
time on the screen to help you achieve better time
management when giving presentations. Follow these
steps to utilize this function:
1.
Press
Timer Set up
on the remote control or
go to the
SYSTEM SETUP: Basic >
Presentation Timer
menu and press
MODE/
ENTER
to display the
Presentation Timer
page.
2.
Highlight
Timer period
and decide the timer
period by pressing
/
. The length of time can be set from 1 to 5 minutes in 1-
minute increments and 5 to 240 minutes in 5-minute increments.
3.
Press
to
highlight
Timer display
and choose if you want the timer to show up
on the screen by press
ing
/
.
4.
Press
to
highlight
Timer position
and set the timer position by pressing
/
.
Top-Left
Bottom-Left
Top-Right
Bottom-Right
5.
Press
to
highlight
Timer counting direction
and select your desired counting
direction by pressing
/
.
6.
Press
to
highlight
Sound reminder
and decide if you want to activate sound
reminder by pressing
/
. If you select
On
, a double beep sound will be heard at
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
7.
To activate the presentation timer, press
and press
/
to select
On
and press
MODE/ENTER
.
8.
A confirmation message displays. Highlight
Yes
and press
MODE/ENTER
to
confirm. You will see the message “
Timer is On
” displaying on the screen. The
timer starts counting at the time the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the
SYSTEM SETUP: Basic
>
Presentation Timer
menu and highlight
Off
.
Selection
Description
Always
Displays the timer on screen throughout the presentation time.
Last 1 Min/Last 2
Min/Last 3 Min
Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Selection
Description
Count Up
Increases from 0 to the preset time.
Count Down
Decrease from the preset time to 0.
