![background image](http://html.mh-extra.com/html/benq/mx813st/mx813st_user-manual_2734877023.webp)
Connection 23
Connecting a Component Video source device
Examine your Video source device to determine if it has a set of unused Component Video
output jacks available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a Component Video source device:
1.
Take a Component Video to VGA (D-Sub) adaptor cable and connect the end with 3
RCA type connectors to the Component Video output jacks of the Video source
device. Match the color of the plugs to the color of the jacks; green to green, blue to
blue, and red to red.
2.
Connect the other end of the Component Video to VGA (D-Sub) adaptor cable
(with a D-Sub type connector) to the
COMPUTER IN-1
or
COMPUTER IN-2
jack on the projector.
3.
If you wish to make use of the projector speaker(s) in your presentations, take a
suitable audio cable and connect one end of the cable to the audio output jack of the
device, and the other end to the
AUDIO IN-1 or AUDIO IN-2
jack of the
projector.
4.
If you wish, you can use another suitable audio cable and connect one end of the
cable to the
AUDIO OUT
jack of the projector, and the other end to your external
speakers (not supplied).
Once connected, the audio can be controlled by the projector On-Screen Display
(OSD) menus. See
"Audio Settings" on page 49
for details.
The built-in speaker will be muted when the
AUDIO OUT
jack is connected.
If the selected video image is not displayed after the projector is turned on and the correct video
source has been selected, check that the Video source device is turned on and operating
correctly. Also check that the signal cables have been connected correctly.