BenQ MX750, User Manual

Page: 13 / 99

Introduction 13
Remote control
1. ON
Turns on the projector. See
"Starting up the
projector" on page 30 for details.
2. COMPUTER-1/COMPUTER-2
Displays RGB (PC)/Component video
(YPbPr/ YCbCr) signal.
3. S-VIDEO
Displays S-video signal.
4. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu. Goes back to previous OSD menu,
exits and saves menu settings. See
"Using
the menus" on page 33 for details.
5. BLANK
Used to hide the screen picture. See
"Hiding
the image" on page 44 for details.
6. Keystone/Arrow keys ( / Up, /
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 32 for
details.
7. MODE/ENTER
Selects an available picture setup
mode. See
"Selecting a picture mode" on
page 39 for details.
Activates the selected On-Screen
Display (OSD) menu item.
See "Using
the menus" on page 33 for details.
8. Left/
Starts the FAQ function. See "Utilizing
FAQ function" on page 44 for details.
9. ZOOM+/ZOOM-
Magnifies or reduces the projected
picture size. See
"Magnifying and
searching for details" on page 37 for
details.
10.
PAGE UP/PAGE DOWN
Page up/down arrows when connected
through USB to a PC. See
"Remote
paging operations" on page 43 for details.
11. FREEZE
Freezes the projected image. See
"Freezing the image" on page 44 for
details.
12. Network Setting
Enables Network Settings OSD menu.
13. TEST
Displays the test pattern. See
"Test
Pattern" on page 73 for details.
14. OFF
Turns off the projector. See
"Shutting
down the projector" on page 69 for
details.
15. VIDEO
Displays vidoe signal.
16. NETWORK
Enables the network mode.
17. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 36 for
details.
1
19
6
7
6
21
17
4
18
9
24
22
20
15
2
3
5
10
11
25
8
12
13
14
16
23