background image

Important safety instructions

5

    

Safety Instructions (Continued)

13.

Do not place this projector in any of the 
following environments.

- Space that is poorly ventilated or 

confined. Allow at least 50 cm clearance 

from walls and free flow of air around 

the projector. 

- Locations where temperatures may 

become excessively high, such as the 

inside of a car with all windows rolled 

up.

- Locations where excessive humidity, 

dust, or cigarette smoke may 

contaminate optical components, 

shorten the projector's life span and 

darken the image.

- Locations near fire alarms
- Locations with an ambient temperature 

above 40°C / 104°F

- Locations where the altitudes are higher 

than 3000 m (10000 feet).

14.

Do not block the ventilation holes.

- Do not place this projector on a blanket, 

bedding or any other soft surface.

- Do not cover this projector with a cloth 

or any other item.

- Do not place inflammables near the 

projector. 

If the ventilation holes are seriously 
obstructed, overheating inside the 
projector may result in a fire.

15.

Always place the projector on a level, 
horizontal surface during operation.

- Do not use if tilted at an angle of more 

than 10 degrees left to right, nor at angle 

of more than 15 degrees front to back. 

Using the projector when it is not fully 

horizontal may cause a malfunction of, 

or damage to, the lamp. 

16.

Do not stand the projector on end 
vertically. Doing so may cause the 
projector to fall over, causing injury or 
resulting in damage to the projector.

3000 m

(10000 feet)

0 m

(0 feet)

Summary of Contents for MX710












































































Reviews: