34 Menu
operation
INFORMATION menu
Closed
Caption
•
Closed Caption Enable
: Activates the function by selecting
On
when the
selected input signal carries closed captions.
Captions: An on-screen display of the dialogue, narration, and sound effects of TV programs and
videos that are closed captioned (usually marked as "CC" in TV listings).
•
Caption Version
: Selects a preferred closed captioning mode. To view captions,
select
CC1
,
CC2
,
CC3
, or
CC4
(
CC1
displays captions in the primary language
in your area).
Standby
Settings
•
Network
: Allows you to make following settings:
•
Monitor Out
: Allows the projector to output a VGA signal when it is in standby
mode and the
COMPUTER-1
jack and the
MONITOR-OUT
jack are correctly
connected to devices.
•
Audio Pass Through
: The projector can play sound when it is in standby mode
and the corresponding jacks are correctly connected to devices. Press / to
choose the source that you wish to use. See
Connection on page 19
for how to
make the connection.
Network
Settings
•
Wired LAN
: See
BenQ Network Projector Operation Guide
.
•
AMX Device Discovery
: When this function is
On
, the projector can be
detected by AMX controller.
•
MAC Address
: Displays the mac address for this projector.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain:
User 1
,
User 2
,
Color Space Conversion
,
Projector
Installation
,
PointWrite Touch Unit
,
High Altitude Mode
,
Security Settings
,
Baud Rate
,
Network Settings
.
Native
Resolution
Shows the native resolution of the projector.
Enable Network
Standby Mode
Allows the projector to provide the network function in
standby mode.
Auto Disable
Network Standby
Mode
Allows the projector to disable the network function
after a set period of time after it enters standby mode.
For instance, if 20 min is selected, the projector is able to
provide the network function for 20 minutes after it
enters standby mode. When 20 minutes is up, the
projector enters normal standby mode.
