Operation
36
4.
16:9
: Scales an image so that it is displayed in the center of the screen with a
16:9 aspect ratio. This is most suitable for images which are already in a 16:9
aspect, like high definition TV, as it displays them without aspect alteration.
5.
16:10
: Scales an image so that it is displayed in the center of the screen with a
16:10 aspect ratio. This is most suitable for images which are already in a 16:10
aspect, like high definition TV, as it displays them with out aspect alteration.
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined
picture modes so that you can choose one to
suit your operating environment and input
signal picture type.
To select an operation mode that suits your
need, you can follow one of the following steps.
• Press
MODE/ENTER
on the remote control
or projector repeatedly until your desired
mode is selected.
• Go to the
PICTURE > Picture Mode
menu and press
/
to select a desired
mode.
The picture modes are listed below.
1.
Bright mode
: Maximizes the brightness of the projected image. This mode is
suitable for environments where extra-high brightness is required, such as using
the projector in well lit rooms.
2.
Presentation mode (Default)
: Is designed for presentations. The brightness
is emphasized in this mode.
3.
sRGB mode
: Maximizes the purity of RGB colors to provide true-to-life
images regardless of brightness setting. It is most suitable for viewing photos
taken with an sRGB compatible and properly calibrated camera, and for viewing
PC graphic and drawing applications such as AutoCAD.
4.
Cinema mode
:
Is appropriate for playing colorful movies, video clips from
digital cameras or DVs through the PC input for best viewing in a blackened
(little light) environment.
5.
User 1/User 2 mode
: Recalls the settings customized based on the current
"Setting the User 1/User 2 mode" on page 36
for
details.
Setting the User 1/User 2 mode
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the
User 1
/
User 2
) as a starting point and customize the settings.
1.
Press
MENU/EXIT
to open the On-Screen Display (OSD) menu.
2.
Go to the
PICTURE
>
Picture Mode
menu.
3.
Press
/
to select
User 1
to
User 2
.
4.
Press
to highlight
Reference Mode
.
