![background image](http://html1.mh-extra.com/html/benq/ms524e/ms524e_user-manual_2734732035.webp)
Operation 35
5.
To navigate the picture, press
MODE/ENTER
to switch to the paning mode
and press the directional arrows ( , ,
,
) to navigate the picture.
6.
Use the directional arrows ( , ,
,
) on the projector or remote control
to navigate the picture.
7.
To reduce size of the picture, press
MODE/ENTER
to switch back to the
zoom in/out functionality, and press
AUTO
to restore the picture to its original
size. You can also press repeatedly until it is restored to the original size.
The picture can only be navigated after the picture is magnified. You can
further magnify the picture while searching for details.
Selecting the aspect ratio
The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV
and computers are in 4:3 ratio,and digital TV and DVDs are usually in 16:9 or 16:10
ratio.
With the advent of digital signal processing, digital display devices like this projector
can dynamically stretch and scale the image output to a different aspect than that of
the image input signal.
To change the projected image ratio (no matter what aspect the source is):
• Using the remote control
1.
Press
ASPECT
to show the current setting.
2.
Press
ASPECT
repeatedly to select an aspect
ratio to suit the format of the
video signal and
your display requirements.
• Using the OSD menu
1.
Press
MENU/EXIT
and then press
/
until the
DISPLAY
menu is
highlighted.
2.
Press
to highlight
Aspect Ratio
.
3.
Press / to select an aspect ratio to suit the format of the video signal and
your display requirements.
About the aspect ratio
1.
Auto
: Scales an image proportionally to fit the projector's native resolution in
its horizontal or vertical width. This is suitable for the incoming image which is
neither in 4:3 nor 16:9 and you want to make most use of the screen without
altering the image's aspect ratio.
2.
Real
: The image is projected as its original resolution, and resized to fit within
the display area. For input signals with lower resolutions, the projected image
will display smaller than if resized to full screen. You could adjust the zoom
setting or move the projector towards the screen to increase the image size if
necessary. You may also need to refocus the projector after making these
adjustments.
3.
4:3
: Scales an image so that it is displayed in the center of the screen with a 4:3
aspect ratio. This is most suitable for 4:3 images like computer monitors,
standard definition TV and 4:3 aspect DVD movies, as it displays them without
aspect alteration.