Connection
24
computer, and the other end to the A
AUDIO or A
AUDIO (L/R) jack of the projector.
When you connect audio output signal from a computer, please balance out the
volume control bar to obtain an optimal sound effects.
4.
If you wish, you can use another suitable audio cable and connect one end of the cable
to the A
AUDIO OUT jack of the projector, and the other end to your external speakers
(not supplied).
Once connected, the audio can be controlled by the projector On-Screen Display
(OSD) menus. See
"Audio Settings" on page 72
for details.
The built-in speaker will be muted when the A
AUDIO OUT jack is connected.
Do not use the RJ45 cable to connect the projector to your computer. Because this
connection needs an IP router.
To connect the projector to a notebook or desktop computer (using HDMI):
1.
Take a HDMI cable and connect one end to the HDMI jack of the computer.
2.
Connect the other end of the cable to the HDMI jack on the projector.
•
Many notebooks do not turn on their external video ports when connected to a projector.
Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate
a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook.
Press FN and the labeled function key simultaneously. Refer to your notebook's
documentation to find your notebook's key combination.
•
Transmission speed and image quality will vary according to the bandwidth of local area
network and the status of network usage.
