Operation
35
English
Fine-tuning the image size and clarity
1.
Adjust the projected image to the size that
you need using the ZOOM ring.
2.
Then sharpen the image by rotating the
FOCUS ring.
Correcting keystone
Keystoning refers to the situation where the projected image is noticeably wider at either the
top or bottom. It occurs when the projector is not perpendicular to the screen.
To correct this, besides adjusting the height of the projector, you will need to manually
correct it following one of these steps.
•
Using the remote control
Press
/
on the projector or remote
control to display the Keystone correction page.
Press
to correct keystoning at the top of the
image. Press
to correct keystoning at the
bottom of the image.
•
Using the OSD menu
1.
Press
MENU/EXIT
and then press
/
until the
DISPLAY
menu is
highlighted.
2.
Press
to
highlight
Keystone
and press
MODE/ENTER
. The
Keystone
correction page displays.
3.
Press
to correct keystoning at the top
of the image or press
to correct keystoning
at the bottom of the image.
Z O O M
FOCUS
Z O O M
FOCUS
Press
/
.
Press
/
.
6
KEYSTONE
Exit
MENU
