Operation
32
English
Disabling the password function
To disable password protection, go back to the
SYSTEM SETUP: Advanced
>
Security
Settings > Change Security Settings
menu after opening the OSD menu system. Press
MODE/ENTER
.
The message
'INPUT PASSWORD'
displays. Enter the current
password.
i. If the password is correct, the OSD menu returns to the
Security Settings
page.
Press
to highlight
Power on Lock
and press
/
to select
Off
. You will not
have to enter the password next time you turn on the projector.
Press
to
highlight
Splash Screen Lock
and press
/
to select
Off
. The
Splash
Screen
function in the
SYSTEM SETUP: Basic
will become available.
ii. If the password is incorrect, the password error message displays lasting for three
seconds, and the message
'INPUT PASSWORD'
displays for your retry. You can
press
MENU/EXIT
to cancel the change or try another password.
Though the password function is disabled, you need to keep the old password in hand should
you ever need to re-activate the password function by entering the old password.
