Operation
43
Function
Description
Quick Cooling
Enables or disables the Quick Cooling function. Selecting On
enables the function and projector cooling time will be
shortened from a normal 90-second duration to approximately
30 seconds.
High Altitude
Mode
A mode for operation in high altitude areas. See
"Operating in
a high altitude environment" on page 36
for details.
Standby Monitor
Out
Selecting On enables the function. The projector can output a
VGA signal when it is in standby mode and the COMPUTER
and MONITOR OUT jacks are correctly connected to devices.
See
"Connecting a monitor" on page 19
for how to make the
connection.
Enabling this function slightly increases the standby power
consumption.
Lamp Settings
Lamp Mode
See
"Setting Lamp Mode as Economic" on page 46
for details.
Reset Lamp Timer
See
"Resetting the lamp timer" on page 50
for details.
Equivalent Lamp Hour
See
"Getting to know the lamp hour" on page 46
for details on
how the total lamp hour is calculated.
Security
Settings
Change Password
You will be asked to enter the current password before
changing to a new one. See
"Utilizing the password function"
on page 24
for details.
Power On Lock
See
"Utilizing the password function" on page 24
for details.
Baud Rate
Selects a baud rate that is identical with your computer's so
that you can connect the projector using a suitable RS-232
cable and update or download the projector's firmware. This
function is intended for qualified service personnel.
Test Pattern
Selecting On enables the function and the projector displays
the grid test pattern. It helps you adjust the image size and
focus and check that the projected image is free from
distortion.
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Position, Phase, H. Size,
User 1, User 2, Language, Projector Position, High Altitude Mode,
Security Settings, and Baud Rate.
4.
SYS
TEM SETUP: Advanced
menu
