![background image](http://html1.mh-extra.com/html/benq/mh530fhd/mh530fhd_user-manual_2734648032.webp)
Operation
32
If you forget the password
If the password function is activated, you will be
asked to enter the six-digit password every time
you turn on the projector. If you enter the wrong
password, the password error message as pictured
to the right displays lasting for three seconds, and
the message
'INPUT PASSWORD'
follows. You
can retry by entering another six-digit password, or
if you did not record the password in this manual, and you absolutely do not
remember it, you can use the password recall procedure. See
for details.
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down in a short time.
Entering the password recall procedure
1.
Press and hold
Auto
on the projector or
remote control for 3 seconds. The projector
will display a coded number on the screen.
2.
Write down the number and turn off your
projector.
3.
Seek help from the local BenQ service center
to decode the number. You may be required
to provide proof of purchase documentation
to verify that you are an authorized user of the projector.
Changing the password
1.
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Security
Settings
>
Change Password
menu.
2.
Press
OK
. The message
'INPUT CURRENT PASSWORD'
displays.
3.
Enter the old password.
• If the password is correct, another message
'INPUT NEW PASSWORD'
displays.
• If the password is incorrect, the password error message displays. You can
press
MENU
to cancel the change or try another password.
4.
Enter a new password.
IMPORTANT: The digits being input will display as asterisks on-screen.
Write your selected password down here in this manual in advance or
right after the password is entered so that it is available to you should you
ever forget it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5.
Confirm the new password by re-entering the new password.
http://www.pureglare.com.au