Operation
28
Auto-adjusting the image
In some cases, you may need to optimize the
picture quality. To do this, press
AUTO
on
the projector or remote control. Within 3
seconds, the built-in Intelligent Auto
Adjustment function will re-adjust the values
of Frequency and Clock to provide the best
picture quality.
• This function is only available when
PC signal (analog RGB) is selected.
Use build-in test pattern
You can adjust the image shape and focus status by observing the input signal content,
or using the test pattern build-in OSD manual from OSD or remote control for
better observe the shape changed.
• Using the remote control
Press the
Quick Install
to display
Quick
Install
menu, and go to the
Test Pattern
>
On
. The
Test Pattern
displays.
• Using the OSD menu
Open the OSD menu and go to the
SYSTEM SETUP: Advanced
>
Test
Pattern
>
On
. The
Test Pattern
displays.
http://www.pureglare.com.au
