![background image](http://html1.mh-extra.com/html/benq/mainstream-mp620c/mainstream-mp620c_user-manual_2734636025.webp)
Connection
21
If you have a separate sound system, you will most likely want to connect the audio output
of your Video source device to that sound system, instead of to the mono audio projector.
The audio connections illustrated in the following sections are provided for informational
purposes only. You need not connect audio to the projector if there is an alternate sound
system available, or if audio is not required.
Connecting a Component Video source device
Examine your Video source device to determine if it has a set of unused Component Video
output sockets available:
•
If so, you can continue with this procedure.
•
If not, you will need to reassess which method you can use to connect to the device.
To connect the projector to a Component Video source device through a
Component Video to VGA (D-Sub) adaptor cable:
•
With a Component Video to VGA
(D-Sub) adaptor cable:
•
With a DVI cable:
1.
Take the (optional accessory)
Component Video to VGA (D-Sub)
adaptor cable and connect the end
with 3 RCA type connectors to the
Component Video output sockets of
the Video source device. Match the
color of the plugs to the color of the
sockets; green to green, blue to blue;
and red to red.
2.
Connect the other end of the
Component Video to VGA (D-Sub)
adaptor cable (with a D-Sub type
connector) to the D-SUB/COMP IN
socket on the projector.
1.
Take a DVI cable and connect one
end of the cable to the DVI output
socket of the Video source device.
2.
Connect the other end of the cable
to the DVI-I socket on the projecto
r.
3.
If you wish to make use of the projector (mixed mono) speaker, take a suitable
audio cable and connect one end of the cable to the audio output socket of the
computer, and the other end to the Audio socket of the projector.