BenQ M2700HD, Service Manual, Page: 16 / 53

BenQ M2700HD Service Manual
15
DDC/CI (ON/OFF) - ON
CEC (ON/OFF)
HDMI source can choose/other source
can’t choose
OFF
Source Auto Search (ON/OFF)
Auto Source On in OSD, search
automatically among
VGA/DVI/HDMI1/HDMI2,
S-Video/Composite/Component on or off
can’t adjust
OFF
Information
Input -
Current
Resolution
Optimum
Resolution
(1)Video Mode
(2)non-Video Mode
(3)Component/S-Video/Composite
(1)
1080P
(2)1920
x1080
@60Hz
(3)Sho
w
(NTSC/
PAL/SE
CAM)
Model Name
- M2700
HD
Reset All (YES/NO) Can’t reset language NO
4.2.3.3. Factory Mode Introduction
Press[MENU], [Enter]& [POWER] at the same time, when Monitor is Power On OSD menu will be shown
with “F” on the left top. Select “F” for entering factory mode.
AUTO Level:
Automatically calibrate chip ADC parameter by using chip internal DAC.
GAIN: ADC gain value
OFFSET: ADC offset value
C1-Blue: Set color temperature 9300K
C2-Red: Set color temperature 5800K
C3-Normal: Set color temperature 6500K
C5-User: Set user preferred color temperature
Lang type: 17
Reset BL Hr: the time of backlight
Reset Total Hr: the total time when connect power
Return: Escape from Factory menu.
4.2.3.4 After repair, to ensure the quality you should do the following test and adjustment
Item Content Equipment
Test OSD
function 1.Signal is set as 1920×1080@60Hz under General-1
2.Checking whether each single function key and compound function key
can be worked.
Chroma
Signal Generator
Contrast
Check 1. Set input mode to 1920×1080@60Hz
2. Set Pattern to 32 gray shades
3. Set brightness/contrast to the max. The brightest 4~8 shades brightness
cannot be distinguished.
Chroma
Signal Generator