![background image](http://html1.mh-extra.com/html/benq/ht3050/ht3050_user-manual_2734553020.webp)
20
Operation
4. If you are prompted to enter the password, use the arrow keys on the projector or remote control
to enter a six-digit password. See
Utilizing the password function
for details.
5. Switch on the connected equipment.
6. The projector starts to search for available input signals. The current input signal being scanned is
displayed on the screen. If the projector does not detect a valid signal, the "
No Signal
" message
appears. You may press
SOURCE
on the projector or remote control to select your desired input
signal.
7. If the horizontal frequency of the input source exceeds the range of the projector, the "
No Signal
"
message is displayed on the screen. It will remain on-screen until you change the horizontal frequency
of the input source to an appropriate one.
Step 3:
Specify
2D Keystone
.
For more information about keystone,
see
Correcting keystone
.
Step 4:
Specify
Auto Source
.
Select On if you want the projector to
always search for available signals
automatically when the projector is
turned on.
Step 5:
Specify
Menu Type
.
For more information about menu
types, see
About the OSD Menus
.
Now you’ve completed the initial setup.