![background image](http://html1.mh-extra.com/html/benq/ht2150st/ht2150st_user-manual_2734551029.webp)
29
Menu Functions
Basic OSD menu - without input signals connected
As there’s no input signal to your projector, only the submenus of
Settings
under
Basic
OSD menu -
with input signals connected are available. Menu options that are not available will become grayed out.
To access the OSD menu, press
MENU
on the projector or remote control.
• Use the arrow keys (
/ / /
) on the projector or remote control to move through the menu
items.
• Use
OK
on the projector or remote control to confirm the selected menu item.
• Use
BACK
on the projector or remote control
to save your changes and exit.
To switch from the Basic OSD menu to the Advanced OSD menu, see page
Menu
Submenus and Descriptions
Wall Color
Activate to help correct the projected picture’s color when the projection surface is
not white. You may choose a color similar to that of the projection surface from these
options:
Light Yellow
,
Pink
,
Light Green
, or
Blue
.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See
for details.
Test Pattern
Enable this function to display the grid test pattern, which helps you adjust the image
size and focus so as to check if the projected image is free of distortion.
Auto Source
Sets whether the projector searches automatically for input sources. Select
On
to
enable the projector to scan for input sources until it acquires a signal. If the function
is set to
Off
, the projector selects the last used input source.
Menu Type
Switches to the
Advanced
OSD menu.
HDMI Range
Selects a suitable RGB color range to correct the color accuracy.
•
Auto
: Automatically selects a suitable color range for the incoming HDMI
signal.
•
Full
: Utilizes the Full range RGB 0-255.
•
Limited
: Utilizes the Limited range RGB 16-235.
HDMI Range is only available when the HDMI signal is selected.
Reset Lamp
Timer
Activate this function only after a new lamp is installed. When you select
Reset
, a
"
Reset Successfully
" message is displayed to notify that the lamp time has been
reset to "0".
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Keystone, Rename User Mode, Audio
Setup, Language, Projector Position, Menu Type, Source Rename, Reset Lamp
Timer, Test Pattern, High Altitude Mode, Password, Key Lock, and ISF.
Information
Displays the following information about your projector.
•
Source
: Displays the current signal source.
•
Picture Mode
: Displays the current
Picture Mode
.
•
Resolution
: Displays the native resolution of the input source.
•
Color System
: Displays input system format.
•
Lamp Usage Time
: Displays the number of hours the lamp has been used.
•
3D Format
: Displays the current 3D mode.
3D Format is only available when 3D Mode is enabled.
•
Firmware Version
: Displays the firmware version of your projector.
Some information is given only when certain input sources are in use.