29
Using the projector
English
Setting the User 1/User 2/User 3 modes
There are three user-definable modes if the current available picture modes are not suitable for your need. You
can use one of the picture modes (except the User 1/2/3) as a starting point and customize the settings.
1. Go to the Picture--Basic > Picture Mode menu.
2. Press
e
Left or
f
Right to select User 1, User 2 or User 3.
3. Press
d
Down to highlight Load Settings From and press ENTER.
4. Press
c
Up or
d
Down to highlight a picture mode that is closest to your need and press ENTER.
5. Press EXIT to go back to the previous page and press
d
Down to select a menu item to be changed and adjust
the value with
e
Left or
f
Right.
6. You can also press EXIT and then press
f
Right to go to the Picture--Advanced menu for further picture
setting adjustments. See
"Advanced picture quality controls" on page 30
for details.
Renaming the User 1/User 2/User 3 modes
To rename the user-definable modes, you can perform the following steps.
1. Go to the Picture--Basic > Rename User Mode menu and press ENTER.
2. Press
c
Up or
d
Down to highlight User 1, User 2 or User 3 and press ENTER.
3. Press
e
Left or
f
Right to select a character position.
4. Assign a letter or a number to this character position by pressing
c
Up or
d
Down repeatedly. Press
c
Up to
select individual letters in alphabetical order, or press
d
Down to select in reverse order. Capital letters,
lowercase letters, numbers from 0 to 9, and a blank space are provided to you.
5. Repeat Step 3 and 4 until you are satisfied with the new name.
• The maximun length is 12 digits.
• The first character cannot be a space.
6. When finished, press ENTER to save the settings.
2. Adjusting picture quality
You can adjust Brightness, Contrast, Color, Tint and Sharpness settings using the Picture--Basic menu or with
the remote control. See
"Picture--Basic menu" on page 37
for details.
• All settings in the Picture--Basic menu will take effect right away and be saved to the picture mode that
you select.
• Some picture adjustments are available only when certain input ports are in use. Unavailable
adjustments are not shown on the screen.
3. Selecting the aspect ratio
The "aspect ratio" is the ratio of the image width to the image height. Most analog TV signals and computers
are in 4:3 ratio and digital TV and DVDs are usually in 16:9 ratio.
With the advent of digital signal processing, digital display devices like this projector can dynamically stretch
and scale the image output to a different aspect than that of the image input source. Images can be stretched in
a linear manner so the whole of the image is stretched equally, or non-linearly, which distorts the image.
You can change the projected image ratio (no matter what aspect the source is) by using the Aspect buttons on
the remote control or in the Display > Aspect Ratio OSD menu. Select an aspect ratio to suit the format of the
video signal and your display requirements. There are five aspect ratios available:
