![background image](http://html1.mh-extra.com/html/benq/gh220-series/gh220-series_user-manual_2733718013.webp)
13
Initial Settings
The language & date/time needs to be set if and when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an extended
period of time.
1. Press the
ON/OFF
button to turn the power on.
2. Press any button to enter language setup.
Select the displayed language with the
c
/
d
/
e
/
f
buttons and press the
SET
button.
3. Select the date format with the
c
/
d
buttons, and press the
SET
button.
4. Select the item’s field with the
c
/
d
buttons and adjust the value for the date and time
with the
c
/
d
buttons.
5. After confirming all settings are correct, press the
SET
button.
Press the
MENU
button will enter capture mode with saving the settings.
Setting the Date and Time
When the date and time information is not displayed on the LCD monitor, follow these steps to
set the correct date and time.
1. Press the
SET
button, and set the camera mode to [
]; or press the
7
button.
2. Press the
MENU
button, and select [Setup]
icon with the
e
/
f
buttons. Press the
SET
button.
3. Select [Date/Time] with the
c
/
d
buttons, and press the
SET
button.
4. Select the date format with the
c
/
d
buttons, and press the
SET
button.
Select the item’s field with the
c
/
d
buttons and adjust the value for the date and time
with the
c
/
d
buttons.
The time is displayed in 24-hour format.
After confirming all settings are correct, press the
SET
button.
5. To exit from the [Setup] menu, press the
MENU
button.
Choosing the Language
Specify in which language menus and messages are to be displayed on the LCD monitor.
1. Press the
SET
button, and set the camera mode to [
]; or press the
7
button.
2. Press the
MENU
button, and select [Setup]
icon with the
e
/
f
buttons. Press the
SET
button.
3. Select [Language] with the
c
/
d
buttons and press the
SET
button.
4. Select the displayed language with the
c
/
d
/
e
/
f
buttons and press the
SET
button.
The setting will be stored.
5. To exit from the [Setup] menu, press the
MENU
button.