BenQ G2220HD - 21.5" LCD Monitor, Service Manual, Page: 15 / 47

15
Dynamics Sharpness
不可调节
Photo Sharpness
不可调节
为
ON
另外两个模式下的
Senseye
Demo
自动变为
ON
2. Senseye Demo
处于
ON
时
,
做
Auto
自动变为
OFF
sRGB Sharpness
不可调节
Senseye Demo (ON/OFF) OFF
Full full
Display Mode
Aspect
Input
（
DVI Model
）
D-sub/DVI D-sub
Language
17 languages
English/
日本語
/
简 体中文
/
繁體中文
/Français/Deutsch/Italiano/Español/Polski/
Č esky/Magyar/(SiCG/BiH/CRO)/Român ă /Ned
erlands/ Русский /Svenska /Português
English
H. Position (0~100) 50
V. Position (0~100) 50
Display Time (5, 10, 15, 20, 25, 30) 15
OSD Settings
OSD Lock (ON/OFF)
（按
Menu
鍵
15s
即可解除鎖定）
OFF
DDC/CI (ON/OFF) - ON
Information - -
Reset All (YES/NO) -
SYSTEM
4.2.3.4. Factory Mode Introduction
Press[MENU], [Enter]& [POWER] at the same time, when Monitor is Power On OSD menu will be shown with
“F” on the left top. Select “F” for entering factory mode.
AUTO Level: Automatically calibrate chip ADC parameter by using chip internal DAC.
GAIN: ADC gain value
OFFSET: ADC offset value
C1-Blue: Set color temperature 9300K
C2-Red: Set color temperature 5800K
C3-Normal: Set color temperature 6500K
C5-User: Set user preferred color temperature
Lang type: 17
Reset BL Hr: the time of backlight
Reset Total Hr: the total time when connect power
Return: Escape from Factory menu.
4.2.3.5After repair, to ensure the quality you should do the following test and adjustment
Item Content Equipment
Test OSD
function
1.Signal is set as 1920×1080@60Hz under General-1
2.Checking whether each single function key and compound function key
can be worked.
Chroma
Signal Generator