![background image](http://html1.mh-extra.com/html/benq/g2220hd-21-5-lcd-monitor/g2220hd-21-5-lcd-monitor_service-manual_2734192014.webp)
14
MENU
□
□
Enter Auto
POWER
FACTORY MODE
●
●
●
Press[MENU], [Enter]& [
POWER
] at
the same time, when Monitor is Power
On OSD menu will be shown with “F”
on the left top. Select “F” for entering
factory mode.
Picture Mode
●
To Show & Change Picture Mode
Menu
Auto Adjustment
●
press [Auto] to process, Auto
Adjustment
Service Page
●
●
Press [MENU] + [POWER] to Enter
Service Page Mode when power off
Input Source
●
Press [Enter] to change Input Source
when OSD isn’t Display.
Note: Picture Mode Standard <( Movie <( Dynamics <( Photo <( sRGB <( Standard
Auto Power on/off function in service mode:
Default is “off”, Monitor will remember the last status before AC off. And monitor would always be off while AC
off->on in “off” mode.
4.2.3.3 OSD Control
The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD
buttons or remote control unit. The unit shall leave the factory with all OSD controls set to their
default values.
First level
Second level
Third level
Fourth level
Default
Auto Adjustment
-
-
-
H. Position
(0~100)
-
50
V. Position
(0~100)
-
50
Pixel Clock
(0~100)
-
50
DISPLAY
Phase (0~63)
-
-
Brightness (0~100)
-
90
Contrast (0~100)
-
50
Sharpness (1~5)
-
3
Normal Normal
Bluish -
Reddish -
*Color
temperature
User Mode
¾
Red (0~100)
¾
Green (0~100)
¾
Blue (0~100)
100
Color
Reset Color
(YES/NO)
PICTURE
Dynamic Contrast
*Dynamic
Contrast
(0,1,2,3,4,5)
Standard
Standard
PICTURE
ADVANCED
**Picture Mode
Movie
Sharpness
不可调节
1.
任一项模式下
Senseye Demo
设
Summary of Contents for G2220HD - 21.5" LCD Monitor
